NFC RFID Reader Writer Tools & FREE SDK (Software Development Kit) – PRODUCTS

• Advanced Modular NFC RFID Readers Writers
• Dynamic Power Control, Low Power Card Detection, Anti-collision
• HF 13.56MHz contactless NFC RFID technology
• Supported standards:
  • ISO 14443 A/B
  • ISO18092
  • ISO15693
  • ISO7816
  • Extended APDU

Read More…

• Multi-ISO Network NFC RFID Reader Writer with modular design
• HF 13.56MHz contactless NFC RFID technology
• Interface Support: USB (CDC, HID, NCP), UART, SPI, Wi-Fi, BLE, Ethernet, GPIO
• Supported standards:
  • ISO 14443 A/B
  • ISO18092
  • ISO15693
  • ISO7816
  • Extended APDU
• Advanced Features: Anti-collision, Dynamic Power Control, Low Power Card Detection, Battery Charger

• Pin-to-pin compatible with Arduino Nano
• Integrates MCU (ATmega32U) and NFC IC (PN512) in a single board
• HF 13.56MHz contactless NFC RFID technology
• Supported standards:
  • ISO 14443 A/B
  • ISO18092
• Main Features: Keyboard emulation, NFC emulation, APDU

Read More…

• Plug&Play Keyboard Emulation NFC Device
• HF 13.56MHz contactless NFC RFID technology
• Interface Support:
  • HID (Human Interface Device)
  • CDC ACM (USB communication device class – Virtual COM Port)
• Supported standards:
  • ISOO14443 A/B
  • ISO15693
• Main features: Reads NFC tag serial number (UID) and performs keyboard emulation.

• Bestselling NFC Reader by Digital Logic
• Full NFC-compliant NFC Reader.
• Built-in hardware encryption, fully-featured FREE Software development kit (µFR Series NFC Reader SDK), all hardware platforms supported.
• Easy implementation for hobbyists and professional developers.
• Connectivity: USB and RS232
• Dimensions: 86.5 x 27 x 10 mm

• Wireless NFC Reader flagship.
• uFR Nano core with ESP32 add-on hardware.
• Write the code directly inside the reader.
• Supports custom firmware.
• Protocols: UDP, TCP/IP, HTTP.
• Connectivity: WiFi (TCP/IP, HTTP, UDP), BLE (Serial, HID, BLE), Ethernet, USB, and RS232
• Dimensions: 86.5 x 27 x 10 mm

• Less sized µFR Classic NFC Reader version, except the size, inherited all the features of the larger device
• RF Booster (optional upgrade) provides up to 50% increased reading range on advanced cryptography cards such as DESFire and JCOP cards
• SAM support (optional upgrade)
• A completely customizable case design
• FREE fully-featured NFC SDK (µFR Series NFC Reader SDK)
• Dimensions: 85.6 x 54.5 x 8 mm

• An upgraded version of uFR Classic NFC RFID reader with additional features such as built-in RTC (Real Time Clock) and internal EEPROM NV memory
• Provides a higher security level. The user-configurable, password-protected part of EEPROM is convenient for storing sensitive data, like license keys or similar
• The RFID reader device is primarily intended for developing companies and individuals (professionals and hobbyists) for further application and turnkey solutions development
• FREE fully-featured NFC SDK (µFR Series NFC Reader SDK

• NFC reader builds upon the NXP PN533 NFC chip according to manufacturers’ recommendations and guidelines
• Full NFC forum compliant NFC reader and LibNFC compatible device
• A large libNFC community is a good starting point for further development
• Compact NFC hardware is ideal for users looking for basic portable devices

• The PR5331C3HN is a highly integrated transceiver module for contactless PCSC Smart Card Reader/Writer communication at 13.56 MHz
• The protocol between the host controller and the PR5331C3HN, on top of this physical link, is the CCID protocol
• Small portable USB device

• The DL533N CS NFC RFID reader writer with PN533 enables the reading and writing of NFC cards and tags as well as NFC P2P communication
• The device is produced by Digital Logic LTD. It is built upon the NXP PN533 chip according to manufacturers’ recommendations and guidelines
• NXP PN533 supports the full range of the NFC Forum specifications and standards

• The PR5331C3HN is a highly integrated transceiver module for contactless PCSC Smart Card Reader/Writer communication at 13.56 MHz
• The protocol between the host controller and the PR5331C3HN, on top of this physical link, is the CCID protocol

• NFC reader based on the NXP PN533 NFC chip
• NFC forum compliant – LibNFC compatible
• libNFC community projects available
• Extra-large NFC hardware, suitable for demanding systems integration

• NFC reader based on the NXP PR533 NFC chip
• PC/SC plug-and-play device
• Personal computer/Smart Card is a standard framework for Smart Card
• ICCs and Personal Computer Systems (PC/SC)

• Raspberry Pi Shield for uFR Series NFC Readers
• RS232 to TTL UART converter
• RS485 to USB converter
• RGB LED Ring (NFC friendly)
• RGB LED modules

• Charge your Android device and communicate with the uFR Series NFC reader at the same time over the same micro USB port
• Many different APB models are available depending on the necessary connection types
• Product customization is available