Befehle werden je nach Zweck in mehrere Gruppen unterteilt.
Gerätebefehle #
Allgemeine Gerätebefehle #
| GET_READER_TYPE | 0x10 |
| GET_READER_SERIAL | 0x11 |
| GET_SERIAL_NUMBER | 0x40 |
| GET_HARDWARE_VERSION | 0x2A |
| GET_FIRMWARE_VERSION | 0x29 |
| GET_BUILD_NUMBER | 0x2B |
| READER_KEY_WRITE | 0x12 |
| USER_DATA_READ | 0x1B |
| USER_DATA_WRITE | 0x1C |
| READER_KEYS_LOCK | 0x27 |
| READER_KEYS_UNLOCK | 0x28 |
| READER_PASSWORD_WRITE | 0x33 |
| SELF_RESET | 0x30 |
| SET_SPEED_PERMANENTLY | 0x4B |
| GET_SPEED_PARAMETERS | 0x4C |
| SET_UART_SPEED | 0x70 |
| RED_LIGHT_CONTROL | 0x71 |
| USER_INTERFACE_SIGNAL | 0x26 |
| SET_RF_ANALOG_SETTINGS | 0x7D |
| GET_RF_ANALOG_SETTINGS | 0x7E |
| SET_LED_CONFIG | 0x6E |
| DEFAULT_UART_SPEED_SESSION | 0xF1 |
Kartenbefehle #
Universelle Kartenbefehle #
| GET_CARD_ID | 0x13 |
| GET_CARD_ID_EX | 0x2C |
| GET_DLOGIC_CARD_TYPE | 0x3C |
| GET_LAST_CARD_ID_EX | 0x7C |
Befehle zur Manipulation von Trailerblöcken #
| SECTOR_TRAILER_WRITE | 0x1A |
| SECTOR_TRAILER_WRITE_UNSAFE | 0x2F |
Befehle zum Blockieren von Manipulationen #
| BLOCK_READ | 0x16 |
| BLOCK_WRITE | 0x17 |
| BLOCK_IN_SECTOR_READ | 0x18 |
| BLOCK_IN_SECTOR_WRITE | 0x19 |
Lineare Datenbearbeitungsbefehle #
| LINEAR_READ | 0x14 |
| LINEAR_WRITE | 0x15 |
| LINEAR_FORMAT_CARD | 0x25 |
| LIN_ROW_READ | 0x45 |
Lineare Datenbearbeitungsbefehle #
Direkte Blockadressierung
| VALUE_BLOCK_READ | 0x1D |
| VALUE_BLOCK_WRITE | 0x1E |
| VALUE_BLOCK_INC | 0x21 |
| VALUE_BLOCK_DEC | 0x22 |
Indirekte Blockadressierung
| VALUE_BLOCK_IN_SECTOR_READ | 0x1F |
| VALUE_BLOCK_IN_SECTOR_WRITE | 0x20 |
| VALUE_BLOCK_IN_SECTOR_INC | 0x23 |
| VALUE_BLOCK_IN_SECTOR_DEC | 0x24 |
Befehle für DESFire-Karten #
| GET_DESFIRE_UID | 0 x 80 |
| SET_DESFIRE_KEY | 0x81 |
| DESFIRE_WRITE_TO_FILE | 0x82 |
| DESFIRE_READ_FROM_FILE | 0x83 |
| DESFIRE_CREATE_APPLICATION | 0x84 |
| DESFIRE_CREATE_FILE | 0x85 |
| DESFIRE_CREATE_AES_KEY | 0x86< |
| DESFIRE_GET_KEY_CONFIG | 0x87 |
| DESFIRE_CHANGE_KEY_CONFIG | 0x88 |
| DESFIRE_DELETE_APPLICATION | 0x89 |
| DESFIRE_DELETE_FILE | 0x8A |
| DESFIRE_SET_CONFIGURATION | 0x8B |
| DESFIRE_FORMAT_CARD | 0x8C |
| DESFIRE_FREE_MEM | 0x8D |
| DESFIRE_WRITE_AES_KEY | 0x8E |
| DESFIRE_CREATE_VALUE_FILE | 0x8F |
| DESFIRE_READ_VALUE_FILE | 0x9A |
| DESFIRE_INCREASE_VALUE_FILE | 0x9B |
| DESFIRE_DECREASE_VALUE_FILE | 0x9C |
| DESFIRE_CREATE_RECORD_FILE | 0x97 |
| DESFIRE_WRITE_RECORD | 0x98 |
| DESFIRE_READ_RECORDS | 0x99 |
| DESFIRE_CLEAR_RECORD | 0x6D |
| DESFIRE_GET_APPLICATION_IDS | 0xC0 |
