سجل تغيير إصدار البرنامج الثابت ΜFR #
قارئ NFC RFID الكاتب جدول إصدار البرامج الثابتة من سلسلة μFR – سجل تغيير الإصدار #
uFR Series Reader Writer Firmware Changelog
| version | comment | upload_date |
|---|---|---|
| 5.0.69 | RGB Ring signalization – CS model compatibility enabled | 2022-10-07 |
| 5.0.68 | RGB Ring signalization feature added | 2022-10-05 |
| 5.100.68 | RGB Ring signalization feature added (RTC and external EEPROM are not supported) | 2022-10-05 |
| 5.100.67 | SAM Read T2T counter in the card emulation mode (RTC and external EEPROM are not supported) | 2022-05-13 |
| 5.0.67 | Read the T2T counter in the card emulation mode | 2022-05-13 |
| 5.100.66 | SAM Patch for ISO14443-4 card which can not wake up after the deselect i-block (RTC and external EEPROM are not supported) | 2022-05-10 |
| 5.0.66 | Patch for ISO14443-4 card which can not wake up after deselect i-block. | 2022-05-10 |
| 5.100.65 | SAM Ultralight C detection bug fix (RTC and external EEPROM are not supported) | 2022-04-27 |
| 5.0.65 | Ultralight C detection bug fix | 2022-04-27 |
| 5.100.64 | SAM Sound volume adjust (RTC and external EEPROM are not supported) | 2022-04-20 |
| 5.0.64 | Sound volume adjust | 2022-04-20 |
| 5.100.63 | SAM Custom RGB signalization and RF inactivity period (RTC and external EEPROM are not supported) | 2022-03-24 |
| 5.0.63 | Custom RGB signalization and RF inactivity period | 2022-03-24 |
| 5.100.62 | SAM Custom RGB signalization sleep mode (RTC and external EEPROM are not supported) | 2022-03-11 |
| 5.0.62 | Custom RGB signalization sleep mode | 2022-03-11 |
| 5.100.61 | SAM Card emulation T2T counter support (RTC and external EEPROM are not supported) | 2022-02-23 |
| 5.0.61 | Card emulation T2T counter support | 2022-02-23 |
| 5.100.60 | SAM NTAG 213 TT support (RTC and external EEPROM are not supported) | 2022-01-18 |
| 5.0.60 | NTAG 213 TT support | 2022-01-18 |
| 5.0.4 | Reset UART timeout 2 s | 2022-01-13 |
| 5.100.59 | SAM NTAG 210u support (RTC and external EEPROM are not supported) | 2022-01-12 |
| 5.0.59 | NTAG 210u support | 2022-01-12 |
| 5.100.58 | SAM UFR_CARD_SIZE_RS232_PLUS_RF_AMP_SAM (RTC and external EEPROM are not supported) | 2022-01-10 |
| 5.0.58 | Extended APDU, NTAG424 TT, ECC signature for NTAG424, Desfire Light and Desfire EV2 | 2022-01-10 |
| 5.0.57 | Extended APDU support | 2022-01-06 |
| 5.100.57 | SAM Extended APDU support (RTC and external EEPROM are not supported) | 2022-01-04 |
| 5.0.56 | Multi card mode up to 10 cards (RTC and external EEPROM are not supported) | 2021-11-15 |
| 5.100.55 | SAM signalization with custom color for each RGB (RTC and external EEPROM are not supported) | 2021-10-07 |
| 5.0.55 | Signalization with custom color for each RGB | 2021-10-07 |
| 5.0.54 | Default RF parameters changed | 2021-09-10 |
| 5.100.54 | SAM Default RF parameters changed (RTC and external EEPROM are not supported) | 2021-08-18 |
| 5.0.54 | Default RF parameters changed | 2021-08-17 |
| 5.100.53 | T2T detection fixed - added NFC_T2T_GENERIC tag detection | 2021-05-12 |
| 5.0.53 | T2T detection fixed - added NFC_T2T_GENERIC tag detection | 2021-05-12 |
| 5.0.52 | SPI set to 4MHz on uFR Nano | 2021-03-02 |
| 5.100.51 | SAM RF on/off in multi card mode added (RTC and external EEPROM are not supported) | 2021-01-11 |
| 5.0.51 | RF on/off in multi card mode added | 2021-01-11 |
| 5.100.50 | SAM Multi card mode bug fix (RTC and external EEPROM are not supported) | 2020-12-28 |
| 5.0.50 | Multi card mode bug fix | 2020-12-28 |
| 5.100.49 | uFR XL reader types added (RTC and external EEPROM are not supported) | 2020-12-17 |
| 5.0.49 | uFR XL reader types added | 2020-12-17 |
| 5.100.48 | Mifare Plus EV1 and SE bug fix (RTC and external EEPROM are not supported) | 2020-12-15 |
| 5.0.48 | Mifare Plus EV1 and SE bug fix. | 2020-12-15 |
| 5.0.47 | Mifare Plus SL1 mode detection bug fix | 2020-12-10 |
| 5.100.47 | Mifare Plus SL1 mode detection bug fix (RTC and external EEPROM are not supported) | 2020-12-10 |
| 5.0.47 | Mifare Plus SL1 mode detection bug fix | 2020-12-10 |
| 5.100.46 | uFR XL RGB diode bug fix (RTC and external EEPROM are not supported) | 2020-12-08 |
| 5.0.46 | uFR XL RGB diode bug fix | 2020-12-08 |
| 5.100.45 | Switch to RF speed 212 and 424kbps bug fix (RTC and external EEPROM are not supported) | 2020-11-19 |
| 5.0.45 | Switch to RF speed 212 and 424kbps bug fix | 2020-11-19 |
| 5.0.44 | Desfire EV2 and Desfire Light read ECC signature (Card emulation disabled) | 2020-10-15 |
| 5.100.43 | NTAG 424 Tag Tamper support (Card emulation disabled) | 2020-10-08 |
| 5.0.43 | NTAG 424 Tag Tamper support (Card emulation disabled) | 2020-10-08 |
| 5.0.3 | Reader parameters have been added | 2020-08-18 |
| 5.0.2 | Serial numbers had been added | 2020-08-04 |
| 5.100.42 | DESFire repair + SPI set to 4.5MHz on CS devices | 2020-05-09 |
| 5.0.42 | DESFire repair + SPI set to 4.5MHz on CS devices | 2020-05-09 |
| 5.100.41 | Additional tolerance for FWT and S(WTX) time-out, for slower ISO 14443-4 devices | 2020-04-30 |
| 5.0.41 | Additional tolerance for FWT and S(WTX) time-out, for slower ISO 14443-4 devices | 2020-04-30 |
| 5.100.40 | Increased tolerance for FWT and S(WTX) time-out --> eMRTD blocked issue fix | 2020-04-30 |
| 5.0.40 | Increased tolerance for FWT and S(WTX) time-out --> eMRTD blocked issue fix | 2020-04-30 |
| 5.100.39 | Desfire Get Application IDs bug fix (RTC and external EEPROM are not supported) | 2020-04-16 |
| 5.0.39 | Desfire Get Application IDs bug fix | 2020-04-16 |
| 5.100.38 | SAM Transaction MAC support (RTC and external EEPROM are not supported) | 2020-04-08 |
| 5.0.38 | Transaction MAC support | 2020-04-08 |
| 5.100.37 | SAM Desfire delete application with application master key | 2020-03-13 |
| 5.0.37 | Desfire delete application with application master key | 2020-03-13 |
| 5.100.36 | SAM Mifare Plus X, SE and EV1 value block operations support | 2020-02-26 |
| 5.0.36 | Mifare Plus X, SE and EV1 value block operations support | 2020-02-26 |
| 5.100.35 | SAM NT4H linear read bug fix | 2020-02-20 |
| 5.0.35 | NT4H linear read bug fix | 2020-02-20 |
| 5.100.34 | SAM New feature: SET_ISO14443_4_MODE with get_ATS option | 2020-02-18 |
| 5.0.34 | New feature: SET_ISO14443_4_MODE with get_ATS option | 2020-02-18 |
| 5.100.33 | SAM TAG emulation in RAM (256 pages 1024 bytes) | 2020-02-13 |
| 5.0.33 | TAG emulation in RAM (256 pages 1024 bytes) | 2020-02-13 |
| 5.100.32 | SAM NT4H (NTAG 4xx DNA) and Desfire light support | 2020-01-30 |
| 5.0.32 | NT4H (NTAG 4xx DNA) and Desfire light support | 2020-01-30 |
| 5.100.31 | SAM UART baud rate change for USB devices (nFR, uFR Classic, uFR CS, ..) | 2019-12-17 |
| 5.0.31 | UART baud rate change for USB devices (nFR, uFR Classic, uFR CS, ..) | 2019-12-17 |
| 5.100.30 | SAM Ultralight C internal 2K3DES key | 2019-11-01 |
| 5.0.30 | Ultralight C internal 2K3DES key | 2019-11-01 |
| 5.100.29 | SAM For Mifare Plus SL3 uses the Mifare Classic functions with AES keys calculated from Crypto 1 key | 2019-10-28 |
| 5.0.29 | For Mifare Plus SL3 uses the Mifare Classic functions with AES keys calculated from Crypto 1 key | 2019-10-28 |
| 5.100.28 | SAM Desfire DES and 2K3DES keys ISO Authentication | 2019-10-16 |
| 5.0.28 | Desfire DES and 2K3DES keys ISO Authentication | 2019-10-16 |
| 5.100.27 | SAM support initial version | 2019-09-30 |
| 5.0.27 | Checking if UID changable, Rf reset | 2019-09-30 |
| 5.0.26 | Anticollision loop bug fix | 2019-09-19 |
| 5.0.25 | Desfire DES, 2K3DES and 3K3DES key support. Operations with records added. | 2019-08-12 |
| 5.0.24 | Improved anti-collision algorithm (multi card mode) | 2019-08-01 |
| 5.0.23 | uFR sleep mode upgrade | 2019-07-31 |
| 5.0.22 | "Error while reading files smaller than 43 bytes" issue fixed | 2019-06-25 |
| 5.0.21 | Idle loop bug fix | 2019-06-12 |
| 5.0.20 | JC DL Storage cards support including "Fast reading mechanism". | 2019-05-17 |
| 5.0.19 | DESFIRE Get application IDs support | 2019-05-16 |
| 5.0.18 | NT3H BlockRead and BlockWrite in sector 0 | 2019-04-12 |
| 5.0.17 | Leave from auto sleep mode bug fix | 2019-03-25 |
| 5.0.16 | UART communication during RGB LED flashing bug fix | 2019-03-15 |
| 5.0.15 | Card emulation mode bug fix | 2019-03-13 |
| 5.0.14 | NT3H cards support | 2019-01-30 |
| 5.0.13 | Bug fix: Desfire functions error codes | 2018-12-20 |
| 5.0.12 | Implemented workaround for Android devices that returns incorrect FWI | 2018-12-17 |
| 5.0.11 | User defined color on RGB LED for Classic devices | 2018-12-14 |
| 5.0.10 | LED signalization update (same color on both sides) for Classic devices | 2018-12-12 |
| 5.0.9 | Enabled higher bit rates (up to 424 kbps) for all ISO14443-4A cards (so far, these speeds have been achievable only with DESFire). | 2018-12-12 |
| 5.0.8 | Desfire file writing bug fix | 2018-12-11 |
| 5.0.7 | Fixed ISO14443A-4 tag detection using SAK | 2018-11-19 |
| 5.0.6 | UART IDLE correction | 2018-11-16 |
| 5.0.5 | backward compatibility hardware version info | 2018-11-09 |
| 5.0.01 | Custom firmware. The card is 400ms in halt state after successful card select operation. | 2018-11-01 |
| 5.0.4 | Keep-alive feature has been added to the APDU TRANSCEIVE command. I_BLOCK_TRANSCEIVE command was fixed, as well as all commands that depended on it, particularly APDU_TRANSCEIVE. | 2018-10-01 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| 5.0.1 | The initial version featured Mifare Plus support | 2018-09-04 |
| version | comment | upload_date |
