μFR 在线固件版本更新日志 #
NFC RFID 阅读器编写器 μFR 纳米在线 ESP32 固件版本表 #
Online Firmware Changelog Table
| Version | Comment | Release_date |
|---|---|---|
| 2.9.0W | MAJOR UPDATE: Network and Bluetooth stability improvements; Azure IoT Hub support; Transparent mode baud rate fixed; Firmware code optimization; Device stability improvements; Network and Bluetooth stability improvements; Modem sleep optimization; Ping speed improvement; RGB LED animation change; Azure IoT Hub support added; Transparent mode baud rate issue resolved | 2022-11-17 |
| 2.9.0E | MAJOR UPDATE: Network and Bluetooth stability improvements; Azure IoT Hub support; Transparent mode baud rate fixed; Firmware code optimization; Device stability improvements; Network and Bluetooth stability improvements; Modem sleep optimization; Ping speed improvement; RGB LED animation change; Azure IoT Hub support added; Transparent mode baud rate issue resolved | 2022-11-17 |
| 2.8.2W | BLE broadcast mode added. A bug with GPIO control over HTTP was fixed. | 2022-08-03 |
| 2.8.2I | BLE broadcast mode added. A bug with GPIO control over HTTP was fixed. | 2022-08-03 |
| 2.8.2E | BLE broadcast mode added. A bug with GPIO control over HTTP was fixed. | 2022-08-03 |
| 2.8.2C | BLE broadcast mode added. A bug with GPIO control over HTTP was fixed. | 2022-08-03 |
| 2.8.1W | The GPIO default state on the boot option was introduced. | 2022-07-19 |
| 2.8.1E | The GPIO default state on the boot option was introduced. | 2022-07-19 |
| 2.8.1C | The GPIO default state on the boot option was introduced. | 2022-07-19 |
| 2.8.0W | HTTPS communication problems have been resolved. Increased card detecting velocity in Master Mode. Performance upgrades. | 2022-06-09 |
| 2.8.0I | HTTPS communication problems have been resolved. Increased card detecting velocity in Master Mode. Performance upgrades. | 2022-06-09 |
| 2.8.0E | HTTPS communication problems have been resolved. Increased card detecting velocity in Master Mode. Performance upgrades. | 2022-06-09 |
| 2.8.0C | HTTPS communication fixed. Faster card detection in master mode. Performance improvements. | 2022-06-09 |
| 2.7.9W | Boot time was decreased. Fix for serial configurator bug. Master mode response handling was improved. | 2022-06-03 |
| 2.7.9I | Boot time was decreased. Fix for serial configurator bug. Master mode response handling was improved. | 2022-06-03 |
| 2.7.9E | Boot time was decreased. Fix for serial configurator bug. Master mode response handling was improved. | 2022-06-03 |
| 2.7.9C | Boot time was decreased. Fix for serial configurator bug. Master mode response handling was improved. | 2022-06-03 |
| 2.7.7W | RGB LED improvement and bug fixes | 2022-05-13 |
| 2.7.7I | RGB LED improvement and bug fixes | 2022-05-13 |
| 2.7.7E | RGB LED improvement and bug fixes | 2022-05-13 |
| 2.7.7C | RGB LED improvement and bug fixes | 2022-05-13 |
| 2.7.6W | External RGB LED support was added. The Master Mode UID conversion bug was fixed. HTTP timeouts feature was added. The mobile AID POST parameter in Master Mode was added. | 2022-05-06 |
| 2.7.6I | External RGB LED support was added. The Master Mode UID conversion bug was fixed. HTTP timeouts feature was added. The mobile AID POST parameter in Master Mode was added. | 2022-05-06 |
| 2.7.6E | External RGB LED support was added. The Master Mode UID conversion bug was fixed. HTTP timeouts feature was added. The mobile AID POST parameter in Master Mode was added. | 2022-05-06 |
| 2.7.6C | External RGB LED support was added. The Master Mode UID conversion bug was fixed. HTTP timeouts feature was added. The mobile AID POST parameter in Master Mode was added. | 2022-05-06 |
| 2.7.5W | The bug with BLE HID upper-case letters not sending was fixed. | 2022-04-02 |
| 2.7.5I | The bug with BLE HID upper-case letters not sending was fixed. | 2022-04-02 |
| 2.7.5E | The bug with BLE HID upper-case letters not sending was fixed. | 2022-04-02 |
| 2.7.5C | The bug with BLE HID upper-case letters not sending was fixed. | 2022-04-02 |
| 2.7.4W | BLE HID mode improvements. | 2022-03-24 |
| 2.7.4I | BLE HID mode improvements. | 2022-03-24 |
| 2.7.4E | BLE HID mode improvements. | 2022-03-24 |
| 2.7.4C | BLE HID mode improvements. | 2022-03-24 |
| 2.7.3W | The Master Mode HTTPS increases response speed by up to 3 times. BLE/BT serial improvements.The MiFare card UDP broadcast support was added. The linear read address bug was fixed. | 2022-03-16 |
| 2.7.3I | The Master Mode HTTPS increases response speed by up to 3 times. BLE/BT serial improvements.The MiFare card UDP broadcast support was added. The linear read address bug was fixed. | 2022-03-16 |
| 2.7.3E | The Master Mode HTTPS increases response speed by up to 3 times. The BLE/BT Serial improvements.The MiFare card's UDP broadcast support was added. The linear read address bug was fixed. | 2022-03-16 |
| 2.7.3C | The Master Mode HTTPS increases response speed by up to 3 times. The BLE/BT Serial improvements.The MiFare card's UDP broadcast support was added. The linear read address bug was fixed. | 2022-03-16 |
| 2.7.1W | The UDP broadcast mode bug is fixed. | 2022-03-02 |
| 2.7.1I | The UDP broadcast mode bug is fixed. | 2022-03-02 |
| 2.7.1E | The UDP broadcast mode bug is fixed. | 2022-03-02 |
| 2.7.1C | The UDP broadcast mode bug is fixed. | 2022-03-02 |
| 2.7.0W | The GPIO control bug in Master Mode was fixed. | 2022-02-18 |
| 2.7.0I | The GPIO control bug in Master Mode was fixed. | 2022-02-18 |
| 2.7.0E | The GPIO control bug in Master Mode was fixed. | 2022-02-18 |
| 2.7.0C | The GPIO control bug in Master Mode was fixed. | 2022-02-18 |
| 2.6.9W | Support for UDP broadcast from NDEF record added. | 2022-02-07 |
| 2.6.9I | Support for UDP broadcast from NDEF record added. | 2022-02-07 |
| 2.6.9E | Support for UDP broadcast from NDEF record added. | 2022-02-07 |
| 2.6.9C | Support for UDP broadcast from NDEF record added. | 2022-02-07 |
| 2.6.92C | DLIO32. Pause command added to Master Mode.Internal beeper support has been added to Master Mode. Open twice. | 2022-02-02 |
| 2.6.8W | The introduction of BLE to the HTTP POST command and the implementation of UDP broadcasting support with card-stored data, Improvements to the BT serial connection | 2022-02-03 |
| 2.6.8I | The introduction of BLE to the HTTP POST command and the implementation of UDP broadcasting support with card-stored data, Improvements to the BT serial connection | 2022-02-03 |
| 2.6.8E | The introduction of BLE to the HTTP POST command and the implementation of UDP broadcasting support with card-stored data, Improvements to the BT serial connection | 2022-02-03 |
| 2.6.8C | The introduction of BLE to the HTTP POST command and the implementation of UDP broadcasting support with card-stored data, Improvements to the BT serial connection | 2022-02-01 |
| 2.6.82C | DLIO32: Two new support lists are enabled. Open twice. | 2022-01-10 |
| 2.6.7W | Serial BLE/BT optimization. The introduction of mobile AID support to the Master mode. | 2021-12-07 |
| 2.6.7I | Serial BLE/BT optimization. The introduction of mobile AID support to the Master mode. | 2021-12-21 |
| 2.6.7E | Serial BLE/BT optimization. The introduction of mobile AID support to the Master mode. | 2021-12-07 |
| 2.6.7C | Serial BLE/BT optimization. The introduction of mobile AID support to the Master mode. | 2021-12-21 |
| 2.6.6C | DLIO32 Offline Mode support added (twice lock open). | 2021-12-01 |
| 2.6.5C | DLIO32: Offline Mode support added. | 2021-12-01 |
| 2.6.4W | GPIO high on boot bug fixed. BT serial TX power option added. Place Mode was added. | 2021-12-21 |
| 2.6.4I | GPIO high on boot bug fixed. BT serial TX power option added. Place Mode was added. | 2021-12-21 |
| 2.6.4E | GPIO high on boot bug fixed. BT serial TX power option added. Place Mode was added. | 2021-12-21 |
| 2.6.4C | GPIO high on boot bug fixed. BT serial TX power option added. Place Mode was added. | 2021-11-16 |
| 2.6.3W | uFR update bug fixed. BT Serial/BLE improvement. | 2021-12-21 |
| 2.6.3I | uFR update bug fixed. BT Serial/BLE improvement. | 2021-12-21 |
| 2.6.3E | uFR update bug fixed. BT Serial/BLE improvement. | 2021-10-29 |
| 2.6.3C | uFR update bug fixed. BT Serial/BLE improvement. | 2021-10-29 |
| 2.6.2W | The Bluetooth Classic connection bug is fixed. | 2021-12-21 |
| 2.6.2I | The Bluetooth Classic connection bug is fixed. | 2021-12-21 |
| 2.6.2E | The Bluetooth Classic connection bug is fixed. | 2021-10-12 |
| 2.6.2C | The Bluetooth Classic connection bug is fixed. | 2021-10-12 |
| 2.6.1W | BLE/Network combine mode added. Master mode two servers mode and UID format option added. | 2021-10-11 |
| 2.6.1I | BLE/Network combine mode added. Master mode two servers mode and UID format option added. | 2021-12-21 |
| 2.6.1E | BLE/Network combine mode added. Master mode two servers mode and UID format option added. | 2021-10-11 |
| 2.6.1C | BLE/Network combine mode added. Master mode two servers mode and UID format option added. | 2021-10-11 |
| 2.5.8W | The BLE TX power option was added. The GPIO State Time Control feature has been added. | 2021-08-31 |
| 2.5.8I | The BLE TX power option was added. The GPIO State Time Control feature has been added. | 2021-08-31 |
| 2.5.8E | The BLE TX power option was added. The GPIO State Time Control feature has been added. | 2021-08-31 |
| 2.5.8C | The BLE TX power option was added. The GPIO State Time Control feature has been added. | 2021-08-31 |
| 2.5.7W | BLE/BT mode reinitialization after connection fails | 2021-07-21 |
| 2.5.7I | BLE/BT mode reinitialization after connection fails | 2021-07-21 |
| 2.5.7E | BLE/BT mode reinitialization after connection fails | 2021-07-21 |
| 2.5.7C | BLE/BT mode reinitialization after connection fails | 2021-07-21 |
| 2.5.6W | UART2 Force mode has been added. UART2 Force mode added. Master Mode Failed command bug fixed. Update fixed. | 2021-06-30 |
| 2.5.6I | UART2 force mode added. Master mode Failed command bug fixed. Update fixed. | 2021-06-30 |
| 2.5.6E | UART2 force mode added. Master mode Failed command bug fixed. Update fixed. | 2021-06-30 |
| 2.5.6CI | UART2 force mode added. Master mode Failed command bug fixed. Update fixed. (IO STATUS - Sensor support) | 2021-07-07 |
| 2.5.6C | UART2 force mode added. Master mode Failed command bug fixed. Update fixed. (NO IO STATUS) | 2021-07-07 |
| 2.5.4W | Support for device configuration backup and restore was added. | 2021-06-16 |
| 2.5.4I | Support for device configuration backup and restore was added. | 2021-06-16 |
| 2.5.4E | Support for device configuration backup and restore was added. | 2021-06-16 |
| 2.5.4C | Support for device configuration backup and restore was added. | 2021-06-16 |
| 2.5.3W | Setting/Getting GPIO over HTTP is fixed. Added the GPIO HTTP API. | 2021-05-27 |
| 2.5.3I | Setting/Getting GPIO over HTTP is fixed. Added the GPIO HTTP API. | 2021-05-27 |
| 2.5.3E | Setting/Getting GPIO over HTTP is fixed. Added the GPIO HTTP API. | 2021-05-27 |
| 2.5.3C | Setting/Getting GPIO over HTTP is fixed. Added the GPIO HTTP API. | 2021-05-27 |
| 2.5.2W | uFR update bug fixed. Frontend auto login added. | 2021-04-27 |
| 2.5.2I | uFR update bug fixed. Frontend auto login added. | 2021-04-27 |
| 2.5.2E | uFR update bug fixed. Frontend auto login added. | 2021-04-27 |
| 2.5.2C | uFR update bug fixed. Frontend auto login added. | 2021-04-27 |
| 2.5.1W | Real-time clock correction. | 2021-04-26 |
| 2.5.1I | Real-time clock correction. | 2021-04-26 |
| 2.5.1E | Real-time clock correction. | 2021-04-26 |
| 2.5.1C | Real-time clock correction. | 2021-04-26 |
| 2.5.0W | BLE auto pairing and bonding bug fixed. HTTP, UDP, and TCP packet losses are fixed. | 2021-04-22 |
| 2.5.0I | BLE auto pairing and bonding bug fixed. HTTP, UDP, and TCP packet losses are fixed. | 2021-04-22 |
| 2.5.0E | BLE auto pairing and bonding bug fixed. HTTP, UDP, and TCP packet losses are fixed. | 2021-04-22 |
| 2.5.0C | LAN and RS232/RS485 issues are fixed. The Async mode issue is fixed. BLE auto pairing and bonding bug fixed. HTTP, UDP, and TCP packet losses are fixed. | 2021-04-22 |
| 2.4.9W | BLE mode set/get GPIO state bug fixed. | 2021-04-05 |
| 2.4.9I | BLE mode set/get GPIO state bug fixed. | 2021-04-05 |
| 2.4.9E | BLE mode set/get GPIO state bug fixed. | 2021-04-05 |
| 2.4.8W | BLE HID linear read mode added. | 2021-03-09 |
| 2.4.8I | BLE HID linear read mode was added. | 2021-03-09 |
| 2.4.8E | BLE HID linear read mode was added. | 2021-03-09 |
| 2.4.8C | BLE HID linear read mode was added. | 2021-03-09 |
| 2.4.7W | BLE security setting added. Setting default settings fixed. Improved stability. | 2021-03-05 |
| 2.4.7I | BLE security setting added. Setting default settings is fixed. Iimprovedmproved stability. | 2021-03-05 |
| 2.4.7E | BLE security setting added. Setting default settings fixed. Improved stability. | 2021-03-05 |
| 2.4.7C | BLE security setting added. Setting default settings fixed. Improved stability. | 2021-03-05 |
| 2.4.6W | Added function for getting the serial number. | 2021-02-12 |
| 2.4.6I | Added function for getting the serial number. | 2021-02-12 |
| 2.4.6E | Added function for getting the serial number. | 2021-02-12 |
| 2.4.6C | Added function for getting the serial number. | 2021-02-12 |
| 2.4.5W | Transparent mode is fixed when AP isAP enabled. LED brightcontrol wasntrol added. | 2021-01-18 |
| 2.4.5I | Transparent mode is fixed when AP enabled. LED brightness control added. | 2021-01-18 |
| 2.4.5E | Transparent mode fixed when AP enabled. LED brightness control added. | 2021-01-18 |
| 2.4.5C | Transparent mode fixed when AP enabled. LED brightness control added. | 2021-01-18 |
| 2.4.4W | Barrier control UART3 support added. | 2020-08-12 |
| 2.4.4I | IoT Cloud support; Bluetooth disabled. USE FOR THE CLOUD IoT ONLY! UART3 support for the Barrier Control was added. | 2020-08-12 |
| 2.4.4E | UART3 support for the Barrier Control was added. | 2020-08-12 |
| 2.4.4C | UART3 support for the Barrier Control was added. (NO IO STATUS) | 2020-08-12 |
| 2.4.3W | Ethernet static IP bug fixed. Bluetooth Classic mode packet transfer is fixed. | 2020-08-04 |
| 2.4.3I | IoT Cloud support; Bluetooth disabled. USE FOR THE CLOUD IoT ONLY! Ethernet static IP bug fixed. Bluetooth Classic mode packet transfer is fixed. | 2020-08-04 |
| 2.4.3E | Ethernet static IP bug fixed. Bluetooth Classic mode packet transfer is fixed. | 2020-08-04 |
| 2.4.3C | Ethernet static IP bug fixed. Bluetooth Classic mode packet transfer is fixed. (NO IO STATUS) | 2020-08-12 |
| 2.4.2W | Multiple HTTP connection bugs are fixed. | 2020-07-06 |
| 2.4.2I | IoT Cloud support; Bluetooth disabled. USE FOR CLOUD IoT ONLY! Multiple HTTP connection bugs are fixed. | 2020-07-06 |
| 2.4.2E | Multiple HTTP connection bugs are fixed. | 2020-07-06 |
| 2.4.2C | Multiple HTTP connection bugs are fixed. (NO IO STATUS) | 2020-07-06 |
| 2.4.1W | HTTP basic authentication support was added. | 2020-06-30 |
| 2.4.1I | IoT Cloud support; Bluetooth disabled. USE ONLY FOR CLOUD IOT! HTTP basic authentication support was added. | 2020-06-30 |
| 2.4.1E | HTTP basic authentication support was added. | 2020-06-30 |
| 2.4.1C | HTTP basic authentication support was added. (NO IO STATUS) | 2020-06-30 |
| 2.4.0W | Frontend setting parameters are fixed. | 2020-06-29 |
| 2.4.0I | IoT Cloud support; Bluetooth disabled. USE FOR THE CLOUD IoT ONLY! Frontend setting parameters are fixed. | 2020-06-24 |
| 2.4.0E | Frontend setting parameters are fixed. | 2020-06-29 |
| 2.4.0C | Frontend setting parameters are fixed. (NO IO STATUS) | 2020-06-24 |
| 2.3.7W | Broadcast Port settings were added. | 2020-06-01 |
| 2.3.7I | IoT Cloud support; Bluetooth disabled. USE FOR THE CLOUD IoT ONLY! Broadcast Port settings were added. | 2020-06-01 |
| 2.3.7E | Broadcast port settings are added. | 2020-06-01 |
| 2.3.7C | Broadcast port settings are added. (NO IO STATUS) | 2020-06-24 |
| 2.3.6W | WiFi scan bug fixed. Introducing the UDP broadcast and network timeout settings. | 2020-05-27 |
| 2.3.6I | IoT Cloud support; Bluetooth disabled. USE FOR THE CLOUD IoT ONLY! WiFi scan bug fixed. Introducing the UDP broadcast and network timeout settings. | 2020-05-27 |
| 2.3.6E | WiFi scan bug fixed. Introducing the UDP broadcast and network timeout settings. | 2020-05-27 |
| 2.3.6C | WiFi scan bug fixed. Introducing the UDP broadcast and network timeout settings. (NO IO STATUS) | 2020-06-24 |
| 2.3.4W | Bluetooth stability improvements. | 2020-05-20 |
| 2.3.4I | IoT Cloud support; Bluetooth disabled. USE FOR THE CLOUD IoT ONLY! Bluetooth stability improvements. | 2020-05-27 |
| 2.3.4E | Bluetooth stability improvements. | 2020-05-20 |
| 2.3.4C | Bluetooth stability improvements. | 2020-05-20 |
| 2.3.3W | Sending log by implementing the POST instead of the GET method | 2020-05-01 |
| 2.3.3I | Bug fixes and improvements | 2020-05-01 |
| 2.3.3E | Log sending by implementing the POST instead of the GET method. | 2020-05-01 |
| 2.3.3C | Bug fixes and improvements | 2020-05-01 |
| 2.3.2W | improved stability. | 2020-04-30 |
| 2.3.2I | improved stability. | 2020-04-30 |
| 2.3.2E | improved stability, | 2020-04-30 |
| 2.3.2C | improved stability. | 2020-04-30 |
| 2.3.1W | Opening reader in UDP and Transparent mode fixed. | 2020-04-14 |
| 2.3.1I | IoT Cloud support; Bluetooth disabled. USE FOR THE CLOUD IoT ONLY! Opening reader in UDP and Transparent mode fixed. | 2020-04-20 |
| 2.3.1E | Opening reader in UDP and Transparent mode fixed. | 2020-04-14 |
| 2.3.1C | Opening reader in UDP and Transparent mode fixed. | 2020-04-14 |
| 2.3.0W | The Captive portal, easy-connect to WiFi and Bluetooth using NFC, and BLE, advertises services. UUID, IoT Cloud support | 2020-04-10 |
| 2.3.0I | IoT Cloud support; Bluetooth disabled. USE ONLY FOR CLOUD IOT! | 2020-04-10 |
| 2.3.0E | Captive portal, Easy connect to WiFi and Bluetooth using NFC, BLE advertise service UUID | 2020-04-10 |
| 2.3.0C | Captive portal, Easy connect to WiFi and Bluetooth using NFC, BLE advertise service UUID | 2020-04-10 |
| 2.2.9W | DESFire master mode, Custom POST parameters, Connecting to WiFi using NDEF | 2020-03-24 |
| 2.2.9E | DESFire master mode, Custom POST parameters, Connecting to WiFi using NDEF | 2020-03-24 |
| 2.2.9C | DESFire master mode, Custom POST parameters, Connecting to WiFi using NDEF (NO IO STATUS) | 2020-03-25 |
| 2.2.8W | HTTP communication bug fixed | 2020-03-03 |
| 2.2.8E | HTTP communication bug fixed | 2020-03-03 |
| 2.2.8C | Fixed: HTTP communication bug fixed. (NO IO STATUS) | 2020-03-03 |
| 2.2.7W | Frontend Test mode bug fixed. | 2020-02-27 |
| 2.2.7E | Frontend Test mode bug fixed. | 2020-02-27 |
| 2.2.7C | Frontend Test mode bug fixed. (NO IO STATUS) | 2020-02-27 |
| 2.2.6W | Ble mode read/notify characteristic toggle support added. | 2020-02-13 |
| 2.2.6E | Ble mode read/notify characteristic toggle support added. | 2020-02-13 |
| 2.2.6C | Ble mode read/notify characteristic toggle support added. (NO IO STATUS) | 2020-02-13 |
| 2.2.5W | Async mode added | 2020-02-11 |
| 2.2.5E | Async mode added | 2020-02-11 |
| 2.2.5C | The BlockBlock card read when the barrier is opened. (NO IO STATUS) | 2020-02-11 |
| 2.2.4W | BLE and BLE HID mode 6-digit pin change support. | 2020-01-14 |
| 2.2.4E | BLE and BLE HID mode 6-digit pin change support. | 2020-01-14 |
| 2.2.4C | BLE and BLE HID mode 6-digit pin change support. | 2020-01-14 |
| 2.2.3W | Master mode - Online serial number added | 2019-12-25 |
| 2.2.3E | Master mode - Online serial number added | 2019-12-25 |
| 2.2.3C | Master mode - Online serial number added, Input pins state (Sensor support) | 2019-12-27 |
| 2.2.2C | Response time fixed. | 2019-12-13 |
| 2.2.1W | Transparent device change without restart. | 2019-12-09 |
| 2.2.1E | Transparent device change without restart. | 2019-12-09 |
| 2.2.1C | Transparent device change without restart. | 2019-12-09 |
| 2.1.9W | Added support for the external device over Bluetooth | 2019-11-12 |
| 2.1.9E | Added support for the external device over Bluetooth | 2019-11-12 |
| 2.1.9C | Added support for the external device over Bluetooth | 2019-11-12 |
| 2.1.7W | Multiple readers connected bug fixed | 2019-11-08 |
| 2.1.7E | Multiple readers connected bug fixed | 2019-11-08 |
| 2.1.7C | Template support added | 2019-11-08 |
| 2.1.6W | Baud rate in transparent mode changed to 1Mbit/s. | 2019-11-04 |
| 2.1.6E | Baud rate in transparent mode changed to 1Mbit/s. | 2019-11-01 |
| 2.1.6C | Initial barrier firmware | 2019-11-04 |
| 2.1.5W | Static IP address option added. | 2019-09-20 |
| 2.1.5E | Static IP address option added. | 2019-09-20 |
| 2.1.4W | Changing AP reset bug fixed. | 2019-09-18 |
| 2.1.4E | Changing AP reset bug fixed. | 2019-09-18 |
| 2.1.3W | BLE communication break fixed. | 2019-09-06 |
| 2.1.3E | BLE communication break fixed. | 2019-09-06 |
| 2.1.2W | Bluetooth LE improved. Up to 8x faster communication. | 2019-09-04 |
| 2.1.2E | Bluetooth LE improved. Up to 8x faster communication. | 2019-09-04 |
| 2.1.1W | Waiting for the 30s to connect on device boot | 2019-08-28 |
| 2.1.1E | Waiting for 30s to connect on device boot | 2019-08-28 |
| 2.1.0W | Try to auto-reconnect to WiFi Access point for 2 minutes if the reader is in AP mode. | 2019-09-17 |
| 2.1.0E | Try to auto-reconnect to the WiFi Access point for 2 minutes, if the reader is in AP mode. | 2019-08-27 |
| 2.0.9W | The option for BLE HID reverse UID has been introduced. | 2019-08-09 |
| 2.0.9E | The option for BLE HID reverse UID has been introduced. | 2019-08-09 |
| 2.0.8W | The incorrect UID bug in BLE HID Mode has been resolved. | 2019-08-07 |
| 2.0.8E | The incorrect UID bug in BLE HID Mode has been resolved. | 2019-08-07 |
| 2.0.7W | The Master Mode dual reader bug has been resolved. | 2019-08-05 |
| 2.0.7E | The Master Mode dual reader bug has been resolved. | 2019-08-05 |
| 2.0.6W | Fixed a driver error bug in BLE HID Mode for iOS and Windows. | 2019-08-05 |
| 2.0.6E | Fixed a driver error bug in BLE HID Mode for iOS and Windows. | 2019-07-30 |
| 2.0.5W | WebSocket support has been added. | 2019-07-29 |
| 2.0.5E | WebSocket support has been added. | 2019-07-29 |
| 2.0.4W | Frontend configuration panel has been updated. uFR Test has been added. | 2019-07-22 |
| 2.0.4E | Frontend configuration panel has been updated. uFR Test has been added. | 2019-07-22 |
| 2.0.3W | A HTTP communication blocking bug has been fixed. | 2019-07-16 |
| 2.0.3E | A HTTP communication blocking bug has been fixed. | 2019-07-16 |
| 2.0.2W | BLE pairing issues have been resolved. Control over RTC and IO pins has been added. | 2019-06-20 |
| 2.0.2E | BLE pairing issues have been resolved. Control over RTC and IO pins has been added. | 2019-06-20 |
| 2.0.1W | Fix for online updating bug. | 2019-06-19 |
| 2.0.1E | Fix for online updating bug. | 2019-06-17 |
| 2.0.0W | Bluetooth Low Energy Mode has been introduced. HID Mode has been introduced. Modem Sleep has been introduced. The HTTPS bug in Master mode has been resolved. | 2019-06-13 |
| 2.0.0E | Bluetooth Low Energy Mode has been introduced. HID Mode has been introduced. Modem Sleep has been introduced. The HTTPS bug in Master mode has been resolved. | 2019-11-04 |
| 1.5.3X | The support for setting the default baud rate of the uFR Nano reader has been added | 2019-04-09 |
| Version | Comment | Release_date |
